HotWheelsBurban
Gotta have 4 doors..... Rawhide, TOTY 2023!
Yes they should have put a bleeder screw on the thermostat housing like Mopar does (or at least did on my 96 Intrepid 3.5 V6.). Put a 4' piece of 1/4" vinyl tubing on it, run the car till no more bubbles are in the line, which is stuck in a bottle of coolant mix. These cars were notorious for air in the system, like the 400s. But Ma Mopar's engineers came up with a factory fix.Yup! Parking the truck overnight with the front end on some ramps or pointing up a hill helps to burp it. Loosen the cap.
These trucks have a rep for retaining air in the cooling system after it's drained or gets down below a certain level.
Sometimes it takes more than one burp session to get all the air out. 3X the last time I did the intake manifold gaskets.