Link me some cab lights!

[Kyle97GMC]

Is this what you guys are using for cab lights?

http://m.summitracing.com/parts/ppp-20-220

Adam

That's exactly what I got but smoked

 

[RHamill]

I am also in the market for cab lights, basically just need to lower the headliner in the front and remove a-pillar and tap cab lights in to parking light b+ and ground right?

anyone ever wire the far left one to blinker and far right one to blinker, so the outside lights flash with blinkers?

 

[Kyle97GMC]

I am also in the market for cab lights, basically just need to lower the headliner in the front and remove a-pillar and tap cab lights in to parking light b+ and ground right?

anyone ever wire the far left one to blinker and far right one to blinker, so the outside lights flash with blinkers?

Yes and you can ground each one individually with one of the screws. Then you just run the one continuous hot wire to the parking lights. Never seen someone wire each corner up but I bet it'd be cool!

 

[SCOTTYINWV]

Dave used OEM.

Either dealer or junkyard. Junkyard is best since you can pull the harness and all. Dealer is just the lenses now I think.

More links to aftermarket cab lights then you could even need are a 2 sec Google away......

Everything I've found says universal. I didn't know if they would fit the roof line.

You know kids these says. You gotta spoon feed the spoiled brats everything....

Come on dad... You never spoiled me

 

[FastOrange]

I used Pacer smoked OEM style from Summit.

Before:

You must be registered for see images attach

During: (Buddy drilling holes)

You must be registered for see images

After:

You must be registered for see images attach

You must be registered for see images attach

 

[phule]

Did you guys just eye ball the spacing when you mounted them?

Adam

 

[great white]

Did you guys just eye ball the spacing when you mounted them?

Adam

Thats a sure way to get 'em wrong from side to side and front to back.

At least measure to make sure you're the same on both sides.

Dave has a how to thread on here somewhere that gives the OEM location measurements and how he did it.

 

[phule]

Just started reading his write up thanks!

Adam

 

[bluex]

Thats a sure way to get 'em wrong from side to side and front to back.

At least measure to make sure you're the same on both sides.

Dave has a how to thread on here somewhere that gives the OEM location measurements and how he did it.

That thread is linked in the second post btw....

 

[FastOrange]

Did you guys just eye ball the spacing when you mounted them?

Adam

No, Used Dave thread, also measured off of a C3500HD and my friend's own truck.

They are not exactly to stock specs, but damn close, we tweaked them abit.