Grandpa's 1995 C1500 Reborn

[JParker2012]

you must've swapped stock brackets. How do you get them off? I removed the headlight pins and got part of it off but I can't get the rest...

Did you take off the headlight adjuster pins?

 

[95C1500]

no those are what I was having trouble with. Are those how they come off?

 

[JParker2012]

no those are what I was having trouble with. Are those how they come off?

Those should come off iirc.

 

[95C1500]

ok, well I tried them already and one snapped and the other stripped out. So I sprayed them with wd-40 and I'll try to get them out tomorrow. Do yu reinstall stock adjusters or use the ones from the aftermarket lights?

 

[JParker2012]

ok, well I tried them already and one snapped and the other stripped out. So I sprayed them with wd-40 and I'll try to get them out tomorrow. Do yu reinstall stock adjusters or use the ones from the aftermarket lights?

I used the stock adjusters, but if you need to I'm sure you could use your aftermarket ones

 

[95C1500]

unless I get lucky and get a whole other light and don't strip the torx screws off either of those, I'll have to use aftermarket...

 

[JParker2012]

unless I get lucky and get a whole other light and don't strip the torx screws off either of those, I'll have to use aftermarket...

If you can't do it without breaking them completely I'd just leave them alone. After you adjust them they should be fine.

 

[Osiris94ej]

You can't just pull the 2 5.5mm bolts you can see at the top of the grille? Leave stock bracket attached to the radiator support, and attach the new lenses to the old bracket's/adjuster bases.

Sent from my XT1080 using Tapatalk

 

[JParker2012]

You can't just pull the 2 5.5mm bolts you can see at the top of the grille? Leave stock bracket attached to the radiator support, and attach the new lenses to the old bracket's/adjuster bases.

Sent from my XT1080 using Tapatalk

Those are the adjusters we were talking about lol

 

[95C1500]

You can't just pull the 2 5.5mm bolts you can see at the top of the grille? Leave stock bracket attached to the radiator support, and attach the new lenses to the old bracket's/adjuster bases.

Sent from my XT1080 using Tapatalk

That's how it's done now.

You must be registered for see images attach