- Joined
- May 7, 2013
- Messages
- 122
- Reaction score
- 25
Ok guys, I’m wondering if anyone has had this problem. First I’ve been restoring/new parts to the ol red beast slowly but had my all latches hinges checked pins/ bushings good and (gm new stuff) on both doors they close and latch like new. So I’ve had a leak it somehow is coming down the outside of the door maybe and pooling up in between the weatherstripping if it pools up enough it flows over to the floor pillar metal part of the side of the floor pan. So I went ahead and replaced both door weatherstrippings to see if maybe that would stop it so, the doors close tight, to where you have to slightly push (not hard) a little to get the door to close when shutting the doors from the new seals. So guess what it still pooled some on the drivers side I’m at a loss and dumbfounded to how it’s getting thru the new seals over to the floor channel ? I took a couple pics to show what I’m saying if u look it starts right past the factory plastic kick pad piece in between the door seal u can see it pooling up. Anyone got any ideas? I do need to replace the drip rail seal at the top of the doors, but that would make it leak like this and only one side .....thanks Brandon
You must be registered for see images attach
You must be registered for see images attach