GMT-800 HD knuckle pair

[454cid]

I bought these several years ago to convert my 1-ton to GMT-800 front brakes, but never had the extra $$$s and down time to do it. They are not a direct bolt on, but the tapers can be bored out to fit GMT-400 ball joints, and then something needs to be figured out for tie-rods. I assume the 800 hubs get used, too...not sure about CV axles. There was one guy on FSC that had done it at the time I bought these. The result was being able to use the slip on rotors and big calipers from the HD GMT-800.

GM numbers 15110011 & 15110012

$100 Shipped in the contiguous 48 states. If you're in AK, HI, or Canada we'll figure that out if needed.

You must be registered for see images attach

You must be registered for see images attach

 

[83GMCK2500]

For reference, my truck & the GMT800 front brake swap: https://www.gmt400.com/threads/1996...nv-4500-daily-driver.23693/page-4#post-853821

 

[454cid]

For reference, my truck & the GMT800 front brake swap: https://www.gmt400.com/threads/1996...nv-4500-daily-driver.23693/page-4#post-853821

Thanks, I didn't know who had done it..... looks like I actually commented in your thread at one point. I just re-read it, and what you added since I posted.

Here is your end product picture:

 

[454cid]

Sold