Floor shifter boot

[sewlow]

That looks good, that’s why I have the stock one available, I got the Core shifter and the old school Hurst style boot.

You must be registered for see images attach

The Core shifter with the stock boot along with that supplied grommet is lame.

You must be registered for see images attach

1/2 a dozen shifts later...

You must be registered for see images attach

 

[HotWheelsBurban]

He lives! Wondered about you, figured you were dealing with what life throws at us.

 

[SNCTMPL]

The Core shifter with the stock boot along with that supplied grommet is lame.

You must be registered for see images attach

1/2 a dozen shifts later...

You must be registered for see images attach

How do you like the shifter?

 

[Caman96]

The Core shifter with the stock boot along with that supplied grommet is lame.

You must be registered for see images attach

1/2 a dozen shifts later...

You must be registered for see images attach

He lives! Wondered about you, figured you were dealing with what life throws at us.

Just noticed your from Abbotsford, BC. Haven’t been there in awhile, but loved my time up there fishing. My brother’s wife lived there.

 

[Luke_P]

I have the one from my son’s 89, if you want it. I think it’s in good shape.

SNCMPL is your son's boot the one with little plastic feet that clip into the large floor console?

 

[SNCTMPL]

There is no console, I can get a picture of the boot this evening.

 

[98Mike]

Is this what you're looking for? '97 w/NV3500.

You must be registered for see images attach

So ugly. (Not just the boot. That floor...! Ew.)
Are you dead-set on OEM?
I made this when I installed the CORE/Hurst shifter. Leather. Thick leather. Too thick!
But I just stitched it up outa some scraps that were close at hand.
With thinner, or vinyl, that bulk around the top would be a lot less.
It's over top of the C/H-supplied dust boot.
Got an upholsterer/trimmer guy around your area?

You must be registered for see images attach

The C/H-supplied dust boot.

You must be registered for see images attach

That's it. Trying to keep the factory look.

 

[SNCTMPL]

Here’s the boot that I have from my son’s 89 with 5 speed. I also have the shifter.

You must be registered for see images attach

You must be registered for see images attach

 

[fancyTBI]

He lives! Wondered about you, figured you were dealing with what life throws at us.

Ditto! @sewlow we’re glad to hear from you again!

 

[skylark]

Is this what you're looking for? '97 w/NV3500.

You must be registered for see images attach

So ugly. (Not just the boot. That floor...! Ew.)
Are you dead-set on OEM?
I made this when I installed the CORE/Hurst shifter. Leather. Thick leather. Too thick!
But I just stitched it up outa some scraps that were close at hand.
With thinner, or vinyl, that bulk around the top would be a lot less.
It's over top of the C/H-supplied dust boot.
Got an upholsterer/trimmer guy around your area?

You must be registered for see images attach

The C/H-supplied dust boot.

You must be registered for see images attach

Holy cr@p, it is AL! How the heck have you been?