jmig
Can't leave it stock
- Joined
- Jun 15, 2010
- Messages
- 811
- Reaction score
- 167
I lost the pics of the floor before I cut all of the rust out but here are some when I started the process of fitting each piece and then welding them into place. This is going in my 89 dually.
New floor pan, inner and outer rocker panels purchased from National Parts Depot.
Floor pan tacked in
Fitting the inner rocker and found more rust to cut out and replace along with the cab corner.
Inside of the cab corner
Outer rocker clamped on for fitment
Inner rocker tacked in
Dug into the cab corner and started replacing the areas that were rusted out.
Almost done fitting the outside rocker
Started fitting the cab corner but need to unbolt the bed
New floor pan, inner and outer rocker panels purchased from National Parts Depot.
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
Floor pan tacked in
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
Fitting the inner rocker and found more rust to cut out and replace along with the cab corner.
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
Inside of the cab corner
You must be registered for see images attach
Outer rocker clamped on for fitment
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
Inner rocker tacked in
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
Dug into the cab corner and started replacing the areas that were rusted out.
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
Almost done fitting the outside rocker
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
Started fitting the cab corner but need to unbolt the bed
You must be registered for see images attach