fixing to buy a 4/6 kit... need some info please

[stroker52]

http://www.summitracing.com/parts/DJM-K2056-4-6/

this is the kit i was looking at....

 

[kevhill85]

you got any pix of your set up??

I will add some pic here
http://s136.photobucket.com/albums/q169/kevhill85/91 bagged truck/?start=0&mediafilter=noflash

 

[stroker52]

sweet... i just seen your pix would like to see some more pix on your rear disk brakes. i know i can buy weld on brake brackets but what calipers you useing and rotors???

also did you keep your stock master?? i want to do that to my 96 just not sure with the ABS...

 

[kevhill85]

Here in bit I will add the details.

buy weld on brake brackets -----smileys I made mine bolt on

what calipers -----S10 front calipers

rotors ------Impala ss rotor 94-97

also did you keep your stock master ------Stock work with no problems. The disk have been on the truck 5 years now.

i want to do that to my 96 just not sure with the ABS------My abs worked fine

 

[kevhill85]

rotors
1995 Impala SS rear rotors (Edit: the holes for the studs will need machined to 5/8")
calipers
$49.95 each Summit racing part #SUM-DSEP-55017R #SUM-DSEP-55017L

Speedway calipers with e-brake NEW not rebuilt and no core charge
$99.99 each loaded Speedway motors part #910-31046 1 left, 1 right

Caliper brackets
$9.99 each Speedway motors part #916-41009 2 needed

Brake line
$49.99 pair Speedway motors part #617-8564 1 needed (come as a pair)

Spacer for E-brake cable will fab up when needed

 

[stroker52]

ok.. i its basicly the same set up i run on my dirt car but the calipers are the front ones off of a 85 monte carlo.. should be the same as the ones your using... and i run 97 camero rear rotors drill to 3/4 cuz i have to run 5/8 studs... and my cars bolt pattern is 5 on 4 an 3/4....

http://www.daymotorsports.com/pop.php?image=7.5-GM-Disc-Brake-Kit.jpg

 

[kevhill85]

ok.. i its basicly the same set up i run on my dirt car but the calipers are the front ones off of a 85 monte carlo.. should be the same as the ones your using... and i run 97 camero rear rotors drill to 3/4 cuz i have to run 5/8 studs... and my cars bolt pattern is 5 on 4 an 3/4....

http://www.daymotorsports.com/pop.php?image=7.5-GM-Disc-Brake-Kit.jpg

You will have to use the impala ss rotor. They are 5 on 5 bolt pattern and just drill the stud hole out...

 

[stroker52]

check these out....

http://www.daymotorsports.com/product/2756/GM-ALUMINUM-METRIC-CALIPER

brackets....

http://www.daymotorsports.com/product/62/BRAKE-CALIPER-MOUNTS

 

[kevhill85]

Here the best pic I have right now

You must be registered for see images attach

You must be registered for see images attach

 

[stroker52]

You will have to use the impala ss rotor. They are 5 on 5 bolt pattern and just drill the stud hole out...

ok cool i got one in the shop now i will look at it tomorrow... hell i can build a kit for $200 sweet... better then $1000 ive seen