Few questions about rebuilding 4l60e

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

93TL93

Newbie
Joined
Feb 1, 2014
Messages
40
Reaction score
1
Thanks everyone for the replies.I will be removing my trans tomorrow after i drive it 30 miles so i can use a lift but wont be disassembling the trans till later.
 

93TL93

Newbie
Joined
Feb 1, 2014
Messages
40
Reaction score
1
Got the trans out with no issues might start to take it apart sunday.
Here is a picture of it sitting on the jack.
You must be registered for see images attach

Also rhino i have not heard from you did you get my private message?
 

highspeed

I'm Awesome
Joined
Apr 23, 2013
Messages
167
Reaction score
0
Good to see it out. You will be working on yours well before I will on mine.
 

93TL93

Newbie
Joined
Feb 1, 2014
Messages
40
Reaction score
1
i will be bringing it home from work tomorrow to start dissembling it through out the week. i will post pictures of what i find.
 

rhino

I'm Awesome
Joined
Nov 23, 2011
Messages
406
Reaction score
29
Location
flowood ms
I sent it with the heading "trans". I will resend it now, be sure to check the spam folder also. The file is too big for yahoo mail so I used "too big for email". Any questions shoot me a text, 601-238-6620. Good Luck!!
 

93TL93

Newbie
Joined
Feb 1, 2014
Messages
40
Reaction score
1
got it tore down to the front planet and stopped. started to tear apart the input and reverse input drums. the 3/4 clutches are burnt up like expected everything else looked good but will be replaced. sorry but no pictures yet.
 

93TL93

Newbie
Joined
Feb 1, 2014
Messages
40
Reaction score
1
alright now that iam ready to buy parts i was looking for some advice on what to get. i do tow and im aggressive on the throttle.
here is the list of parts i need.
-all frictions and steels
-seals and bushings
-sunshell
- rear planet
-shift kit
-wiring harness
-torque converter
-corvette servo
-band

any suggestions on any other parts or what specific brand of items i should get would be helpful. and a seller or store i should buy from. thanks
 

93TL93

Newbie
Joined
Feb 1, 2014
Messages
40
Reaction score
1
alright after searching everywhere i have narrowed down the parts.
option 1 would be this from monster transmission.
http://www.monstertransmission.com/...ter-In-A-Box-1993-97_p_5087.html#.Uv_teGJdXxA

option 2 is various parts from ebay.
http://www.ebay.com/itm/171224647672
http://www.ebay.com/itm/171232837315
http://www.ebay.com/itm/250762916163
http://www.ebay.com/itm/251362131104
http://www.ebay.com/itm/360797386250

the ebay parts come out together to 490.65 and the monster kit is 499.95
i do believe the ebay option has more. but im no expert so let me know what you guys think my best option is. thanks
 

rhino

I'm Awesome
Joined
Nov 23, 2011
Messages
406
Reaction score
29
Location
flowood ms
Between those two I would go with monster. It has all of the solenoids, the sprags, and the pump kit.
 

93TL93

Newbie
Joined
Feb 1, 2014
Messages
40
Reaction score
1
that is what i was thinking probably going to order that tonight. i was considering their higher kit but i figured id never make enough power to need that, thanks for the reply and all the help
 
Top