fixit
Newbie
my phone is 970 985 2696. Thanks. DaveDo you have a number for me to reach you.
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
my phone is 970 985 2696. Thanks. DaveDo you have a number for me to reach you.
I have been looking a zif and proms. How many pins do I get?What service # ECM do you have, maybe 1227747? Did you upgrade it with a ZIF socket and SST 27SF512 EEPROM or are you still using the OE 2732A EPROM?
It's a 28 pin Zif socket which you solder a couple jumpers to use it as a 24 pin in the 7747.I have been looking a zif and proms. How many pins do I get?
I have received the zif and prom. If you can burn one, let me know. Thank you.Do you have a number for me to reach you.
Thank you. You are above my knowledge in computer speak , but I will get the BCC and get back with you. Thanks again. I have had this problem many years and it is time to fix it as I will be using it to pull 5000lb.Do you have the Moates Burn2? Look inside your ECM to see which .bin (BCC) you have. Yours should look like the chip on the right. in this case it's AKCW.
You must be registered for see images attach
Then look here to find your .bin and download it.
http://www.gearhead-efi.com/gearhead-efi/bin/
Or you can CAREFULLY remove your chip from its plastic holder and read it with the Burn2 to TunerPro RT. Then apply the "patch" for EGR Disable. Flash your 27SF512 chip (with Flash and Burn) and install it.
You must be registered for see images attach
You should also apply the patch for "BPW and Spark Advance Hack" so you can see them while data logging with TP.