96c1500FullRebuild
Newbie
Hey guys, new here. Obviously. I just put a new 350 in my ‘96 with a 490/490 cam and 1.6 rockers. Right now im dealing with a P0300 code. I bought a good scanner to get live data from the computer but im new to this fuel injection.
I need some help narrowing down what the issue could be before I do my computer swap.
I guess my first question would be could my low intake vacuum be causing my misfires by not sending enough vacuum to the intake parts; IAC, EGR, etc.?
At idle im just shy of 10 inches of vacuum which is low for these engines, im sure.
My second question is, being that my cam is so big, especially with the 1.6 rockers, will these factory intakes even run with it? If not, what intake swaps are you guys doing to make these motors perform?
I need some help narrowing down what the issue could be before I do my computer swap.
I guess my first question would be could my low intake vacuum be causing my misfires by not sending enough vacuum to the intake parts; IAC, EGR, etc.?
At idle im just shy of 10 inches of vacuum which is low for these engines, im sure.
My second question is, being that my cam is so big, especially with the 1.6 rockers, will these factory intakes even run with it? If not, what intake swaps are you guys doing to make these motors perform?