Bagged 1994 silverado front exhaust pipe question.

[sowell]

You must be registered for see images attach

What's the best way to relocate front pipe or raise it,I land on it when i drop down in the front,truck will not lay in the front until i take care of this issue,ant sugg?????

 

[3quarter]

on my old bodied one i took it to a muffler shop and had them just move it up

 

[MOBS]

Take it somewhere and have them cut it out and relocate closer, like 3quarter said, but make sure they wrap it or put a shield between it and bellhousing. Ya don't want it cooking your torque converter or your input shaft.

 

[3quarter]

but make sure they wrap it or put a shield between it and bellhousing. Ya don't want it cooking your torque converter or your input shaft.

I knew there was something else i was forgetting

 

[sewlow]

When I had mine changed, I had them re-reoute it under the front of the oil pan, behind the cross member, which is now the lowest point.

 

[Marcos]

When I had mine changed, I had them re-reoute it under the front of the oil pan, behind the cross member, which is now the lowest point.

Thats the best way.

 

[MOBS]

Pffft.....just run zoomies, that'll cure any/all exhaust drag.

 

[e3mcgrath]

v - old truck

You must be registered for see images attach

You must be registered for see images attach

 

[///RAGMC]

I ended up running the edlebrock y pipe http://www.jegs.com/p/Edelbrock/Edelbrock-Crossover-Pipes/761465/10002/-1

 

[scotts95sierra]

Anyone run it down the drive side of the trans then back over to the passenger side behind the trans