Breakdown
I'm Awesome
Cats gone. Wasn't on the truck when I bought it. I plan on placing one on it in the near future (dynomax has the y pipe and cat kit for around 200) but as of right now it's not even there
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Sense you have already cleaned you headlight, and if you have not do so already, You should do the 4 high headlight mod, but also add an extra relay for just the low beams. This makes a huge difference. When I did my 4 high mod and saw how much brighter the lights were on high, I could not believe the difference, but when on low beams, they were still dim. So I figured I would try another relay on just the low beams. I cut the OE + wire for the lows next to the battery, and use this for my switch wire to activate the relay. Then I ran a AWG # 10 wire from the battery to the relay input and back to where I cut the wire on the headlight side. Now my lights are supplied straight off of the battery from a larger wire. This makes a huge difference in brightness. I did not replace any wire to the lights, I just tapped in a larger wire straight off of the battery. The only other thing I had to do was to remove the fuse for the DRLs. This was enough power (the DRLs) to activate the relay.I got bored today and used a polishing kit I had to clean the headlights since they were so yellow I could barely see this morning.