It looks like you have a couple stored MALF Codes - 13 - O2 sensor bad and 34 - low MAP but they seem to be working OK. You need to reset it by disconnecting the battery for a few minutes. Your Integrator (it went into closed loop at ~120*) is calling for ~128 which is good but, at idle the Block Learn Multiplier is low meaning rich. Your timing, once warmed up is jumping from as low as 16* up to 22*, don't know why. It looked like your idle was pretty good 650 - 700RPM. When you revved it up you got 74 Knock Counts but it didn't pull any timing. By just revving it up you shouldn't see any KCs. You probably need to take it for a drive and try to duplicate your problems.
You must be registered for see images attach
Again, I'm guessing you have a 7427 PCM, it would be nice if we had that confirmed and what bin you have. I'm using A219$OETP5v250.adx to run your log (with the assumption on the '94 7427).
Anyone else wanna take a shot at it?