AC not getting cold

[ChrsLytn]

I've got new compressor, condenser, orifice and dryer from Napa. Flushed all the lines and the evaporator. Added 8 oz of oil to the system where it said to. Charged it with 2.25 lbs of 134 and I'm getting what can be seen in the video.
The AC worked decent back in October but the compressor was leaking some oil and was kinda noisy. Is the video enough for one of you more knowledgeable than myself to give me an idea what the problem could be? Thanks

xc_hide_links_from_guests_guests_error_hide_media

 

[evilunclegrimace]

Your video does not show.

 

[Orpedcrow]

No video…

Are you using a set of manifold gauges? What’s your high and low side readings? Did you vacuum the system before filling?

 

[F4U-1A]

Sadly my AC went all Kaput about 15yrs ago. I am old now, do not need it in the summer when ever that comes? Still lots of snow on the ground. It was 20F last night. All Good

 

[GoToGuy]

1 Replace orifice valve? N/A done
2 vacuum the system, for moisture and leak check?
3 what does the servicing label list as refrigerant capacity?
4 What are your manifold gauge readings?
5 what is temp air out of vents?
Did you check your post your videos don't show up.