Bm1912
Newbie
I think I’m going to wire a switch to the headlights. I’m probably going to have to buy a new harness and rewire it
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Where the brown spot is at the bottom of the access panel, under the fuze box, was a screw. Here is a pic of mine. With this screw removed, you may be able to push the fuze block inward and get to the supply wire.You must be registered for see images attachI know this probably is not safe but I can not figure out how to get behind the fuse box to add the power wire to the fuse
Are these HID relays or what? My headlights are weak and stay on while sun is out. Am strongly considering doing another HID conversion like I did on my Prelude. Any tips?Oh and #15 fuze on mine that has no fuze, is for the DRLs. My headlights are running off of relays at the battery. This makes the headlights much, much brighter.
No. They are regular relays I bought at Orileys auto parts. By adding relays, and bigger supply wire, you are giving your headlights more amps to draw from. This makes the OE headlights MUCH MUCH brighter. There is no need for HID headlight bulbs that blinds every other driver on the road. Here are a few pics of my set up.Are these HID relays or what? My headlights are weak and stay on while sun is out. Am strongly considering doing another HID conversion like I did on my Prelude. Any tips?