DennisT
I'm Awesome
Continuing to improve my high mileage '96 GMC K1500, my seats are the cloth 60/40's with non-working electric lumbar. I don't care much about the lumbar, however, being older and having some back trouble, a full power seat would be appreciated by me and especially my spine. Not easy to find great seats in wrecking yards. My cloth material is good - no tears, etc. Foam mostly OK I guess, but with the lousy manual adjustments I have it's hard to get things just right. Roughly comfortable, but no improvement to be made with what I have. So......
1. Can I take a good working full power seat from a similar year truck, pull the seat cushions, etc., off and drop my cloth set on???
2. If so, what model years are compatible?
3. I was told the two-wire connector for my electric lumbar is the same power feed I need for full power seats. True?
I'm watching wrecking yards for a decent full seat set that doesn't require all this, but most of of them are rough - the fabric and foam, etc., are bad.
Thanks, Dennis
1. Can I take a good working full power seat from a similar year truck, pull the seat cushions, etc., off and drop my cloth set on???
2. If so, what model years are compatible?
3. I was told the two-wire connector for my electric lumbar is the same power feed I need for full power seats. True?
I'm watching wrecking yards for a decent full seat set that doesn't require all this, but most of of them are rough - the fabric and foam, etc., are bad.
Thanks, Dennis