Supercharged111
Truly Awesome
- Joined
- Aug 20, 2015
- Messages
- 12,789
- Reaction score
- 15,651
Just cover the ds in sound deadening, gtg.
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
ahhh my friend..... Im so proud!!!! I see some LAYERS there. Thats the key to that sound deadening..... Multiple layers!!!! Looks good bro !!!!!I also got a bit more sound deadening done.
You must be registered for see images attach
6 sheets alone on that side. I have a total of 20.ahhh my friend..... Im so proud!!!! I see some LAYERS there. Thats the key to that sound deadening..... Multiple layers!!!! Looks good bro !!!!!
The best thing to do is weld a 1x1 section of square tube from A pillar to B pillar to help keep it in line. I also inspected it a bit more yesterday, the cab mount is actually fine. The floor pan rusted away around it so I should be able to separate the floor pan and plug weld it to the cab mount, and weld the pan to everything else.I'm really interested in your process for replacing the floor pan, mount, and rockers Because you're doing so much, how will you keep it all oriented correctly and in the right locations?
You have sizes leading up to that one, correct? You have to step it up. That pedal is crazy hard!!$18 drill bit to finalize the conversion to manual brakes. Drill bits and drills are my only red tools(Milwaukee).
You must be registered for see images attach
I also got the heater box and its harness back in.