92 Soild front Axle Swap

[RnuovZ71]

I have finaly collected most of the parts I needed to start the SAS on my 92 ECSB Chevy. This next week I will be getting my springs in along with all the stuff for my hydro steering. Tomorrow I'm going to order my detriot lockers and 4.56s front and rear. it should be 9" in front and 8" in the back.

What I would like to have done still Is get the bed sprayed w/ rhino liner(or the like), I would also like the have the quarter panels rhino lined. Then I need a new motor. The list goes on with odds and ends, but It will slowly come along.

This is the list of stuff I have so far...

78 dana 60 kingpin front.
87 dana 70 rear.
ORU SAS kit +6" in spring length.
16x10 Black steel rims.
Kingpin rebuild kit.
New pads/ shoes for the brakes.
new ujoints for the axle shafts.
37x13.50 mickey thompson Baja Claws.
4.56s Front & Rear.
Detriot lockers F/R.
Hydro steering stuff.
Draglink.
Steering arm.
Tie rods.
Brake lines.
Hub Bearings.
Ubots and Ubolt plates.
Ujoint rear axle.
Front driveline.
Shocks.


The rims

You must be registered for see images attach

The rear d70

You must be registered for see images attach

The front d60

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

I still need to mod the exhaust a little...

You must be registered for see images attach

Well this is where she sits as of right now, althought not pictured. I do have the front spring mounted on one side of the hanger.

You must be registered for see images attach

Got my tires...

You must be registered for see images attach

You must be registered for see images attach

I got alot done on the D70 lastnight, But I forgot the damned Ebrake cable. So I get to pull the drum off again and put the damned cable in. O'well atleast its eazy...

You must be registered for see images attach

Waiting on the gears still, I also need new hub bearings. I new I was missing something:LOL:

You must be registered for see images attach

I'm useing an old spring pack and jack to lift the springs to mount them

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

BTW the Pass side of the truck is a ***** to drill holes in.

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

I still have alot of tweaking to do, but I'm getting real close to being done. I have the PS gear box drilled and tapped. I have all the brake lines. I need to finish my new tie rod and drag link. I need to make a trac bar. I need to finish removing the BL and all the crap along with it, ect,ect,ect...

 

[RnuovZ71]

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[RnuovZ71]

Here is the ram

You must be registered for see images attach

You must be registered for see images attach

I have to fab up some new mounts for the rear bumper

You must be registered for see images attach

You must be registered for see images attach

They choped off the rear frame mount :teddy:

You must be registered for see images attach

The PS Gear Box Started to leak :teddy:

You must be registered for see images attach

Random tire pile :LOL:

You must be registered for see images attach

The drag link

You must be registered for see images attach

You must be registered for see images attach

The Lines for the ram were getting hit by the Pitman arm so I have to change the fittings on them

You must be registered for see images attach

 

[RnuovZ71]

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

The rear is fully mounted, the front still needs alittle work

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

Much better with the front bumper on, I'm going to a friends shop to weld the mounts on the bumper tonight.

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

SHOCK PICS!!!!

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[RnuovZ71]

On the list of mods now when money permits!

1. New PS gear box and Ram(mine ate its self along with the Ram and PS pump)
2. 6.0L motor
3. Fab a new rear bumper
4. New winch for the front
5. Track bar(panhard)

 

[bggrnchvy]

Very cool.

How did that front shackle angle end up, looked a little tight drooped out.

Front bumper looks good, still

 

[RnuovZ71]

Very cool.

How did that front shackle angle end up, looked a little tight drooped out.

Front bumper looks good, still

All the angles came out perfect, the pics make it look a little off.

The only thing I have a problem is the front drive line, the angle on the front axle is perfect but i think yoke is to tight for the front drive line.

BTW that bumper has been through HELL and back!!! some how it and my truck survived me hitting a tree head on when i lost control going down hill on an icy road!

 

[RnuovZ71]

If you guys have any questions on my build feel free to PM, most of my write up has been lost!