Canadian Rust Bucket
I'm Awesome
I think this is based on my setup. https://www.gmt400.com/threads/my-95-rclb-c1500.59020/post-1297622I drew this up in TinkerCAD just to see if I want to do it. I have an old 12" Infinity sub from my '69 Cadillac, but the box is too big for Roscoe. I took measurements behind the seats of my son's truck and this looks like the max size. Having seen someone else's sub and shelf setup, I decided that's what I want. I looked up enclosure sizes, and it looks like I'll want between 1.25 and 1.75 cu/ft of volume. This is right at 1.5 cu/ft, and that center section looks huge.
You must be registered for see images attach
If you do decide to go this route, check the depth of your sub driver. I found that after I made the box, I had to carve out a divot in the back panel so the sub would sit into the box properly.