Mean Green
I'm Awesome
I have been eyeballing this harness you have for a week now and I am trying to figure out the difference between yours and the one from LMC. I called LMC yesterday and they told me their harness uses 10awg wire. I find this hard to believe since their kit is only $30 and its made in China I bet. Can you give me some insight on your harness a little more as it compares to the LMC one? I do like the 4hi mod so your harness is a lot more appealing at the moment since its all in one setup.
Also, the kicker for me is that I have all the 14awg wire AND the 9006/9005 sockets. I just need relays. I just don't have a wiring diagram at the moment and Im pressed for time.
Thanks for your interest! And welcome to the forum. There are several differences between my harness's, and the harness's that LMC truck sells. The very big factor is the quality of the harness itself, as well as the quality of the components used to build the harness. LMC Truck's Harness may use "10"awg" wire for there single power wire. However, I use TWO 10AWG Wires to get power from the battery to the HD Harness, which results in guaranteeing the harness gets plenty of voltage from the battery, to relay the 13.8V+ of power to the headlights. Allowing your headlights to get the full power they NEED. My HD harness's also utilize 14 gauge marine grade wire to ensure that you never have problems with corrosion or anything else of that nature... ever. EVERY connection is cleanly soldered and heat shrunk to provide the best connection possible, and is 100% plug n play, so there is no need to cut ANY wires what so ever!
Also, the harness's are completely wrapped with heat resistant conduit loom. So there is no dangling wires, and makes for a very clean installation. And no need to worry about the elements coming in contact with the harness. I personally make every one of these harness's, and there made of the best components possible. Also they include complete install directions (LMC truck's directions are in Chinese), and I stand behind my product because I build everyone of these to the highest grade possible! If you have any other questions please feel free to ask!
Last edited: