383 stroker build

[eg30.06]

Hey all I've been slowly gathering parts together for a 383 stroker. As of now I have a vortec small block 350 in the machine shop, an eagle 383 rotating assembly, and edelbrock e-tec 200 heads and a edelbrock performer intake that I'm going to run an adapter plate to me 670 cfm throttle body.
Anyone have a cam recommendation for me? I want hydraulic roller. I wouldn't mind a lumpy idle as it's standered and my weekend toy/tow rig. Thanks

 

[polar]

Look at the cam that Eric st used in his build or use the one edelbrock has on their site for their top end kits


Sent from my iPhone using Tapatalk

 

[Birchyboy]

Awesome! I might do a 383 upgrade if/when mine s the bed. If the tranny goes first, I'm going to have it rebuilt to accommodate more power, especially for towing.

 

[eg30.06]

Who is Eric st? I tried looking him up but came up with nothing.
Thanks for the response

 

[polar]

Here is his build thread. http://www.gmt400.com/forum/showthread.php?t=9860


Sent from my iPhone using Tapatalk