rumblebee10
Newbie
- Joined
- Apr 18, 2012
- Messages
- 48
- Reaction score
- 0
Well I'm pretty much swapping out my 91 350 to a 94 350. Both are TBI but there's different things on the 94. Mainly a sensor that I'm not familiar with. I really don't know what it does so I was hoping you guys could help. It sits in front of the TBI unit and it has a small hose going to the TBI right next to the PCV hose.
I'm clueless to what it is.
Also, the EGR lines are broken and I can't find them at NAPA. Any ideas to where I can find one? I would appreciate everyone's input. So far what I want to do is just swap out the engine to make it a DD for a while. At least until I build another one for it. I rebuild my dads dodge 318 so I'm short on funds for this one.
You must be registered for see images attach
I'm clueless to what it is.
Also, the EGR lines are broken and I can't find them at NAPA. Any ideas to where I can find one? I would appreciate everyone's input. So far what I want to do is just swap out the engine to make it a DD for a while. At least until I build another one for it. I rebuild my dads dodge 318 so I'm short on funds for this one.