14 Bolt Swap How to

[MYT HI]

What shocks did u use? I'm getting some 3/4 ton springs next week and I'm gonna need new shocks

 

[thz71]

I used 6 inch lift shocks so i wouldnt have to get new ones if i wanted to go higher

Sent from my SCH-R530U using Tapatalk

 

[MYT HI]

I used 6 inch lift shocks so i wouldnt have to get new ones if i wanted to go higher

Sent from my SCH-R530U using Tapatalk

Like what brand

 

[thz71]

Pro comp

Sent from my SCH-R530U using Tapatalk

 

[AirmanSkee]

Just verifying the U Joint you used... Was it a 1310-50? I heard the joint on ours is different, like a S44 (3RL) or something like that? Just trying to find out so I can get mine.

 

[thz71]

1310-1350 yah thats what i used and it worked

 

[bambam78]

Hey guys, bought a 14 bolt sf today but it's missing the pinion yoke, will my stock ten bolt yoke fit on it? And what would be the proper way to install it, do I need new crush sleeves? Thanks

 

[mr98z71]

10 bolt and 14 bolt yokes are different, they are not interchangeable. You will need a new crush sleeve.

 

[dirtridinz71]

10 bolt and 14 bolt yokes are different, they are not interchangeable. You will need a new crush sleeve.

Wrong the 10 bolt yoke will swap. That's all I ran on the 14 bolt in my 92 rcsb after putting it under it, no conversion joint, just stayed with the standard 3r(s44) u-joint.

 

[Geo's66]

Guys, early in this but where's a good place to buy a 14 bolt? I'm going to rebuild or ls swap my vortec next year and might as well start looking now... Thanks and great info