Made some good progress today. Put an ebay oem used radiator in, as the oem new radiators for 8.1 are extremely difficult to find. Core support in, oil cooler lines attached. Took the power steering cooler from the 6.0 core support which suprisingly the parts truck never had.
You must be registered for see images attach
You must be registered for see images attach
Bumper on. These things are too heavy to lift, so I improvised and used a soft shackle and my engine hoist to get it into place.
You must be registered for see images attach
You must be registered for see images attach
And lastly, another door for the passenger side rear. The original one was actually slightly bent at the top, and didnt sit 100% flush with the top corner. It also had a very loose latch, and the handle was difficult to open. The new one is better, but not cosmetic wise....high winds pushed it over a few weeks ago when it was laying up against the truck, so it's going to need body work, and paint.
You must be registered for see images attach