Bowtie Brody's Namesake 96 454

Ah, I remember telling you about a 5v flip-flop circuit that would give us the light but I can't remember where I sourced it.

Mangonesailor said:

Ah, I remember telling you about a 5v flip-flop circuit that would give us the light but I can't remember where I sourced it.

Click to expand...

I've got a link saved somewhere. I also had a how-to that was on an S10 forum I believe, but I don't know where it went

would be nice if there was a pin that just sent a signal when it was on..

BNielsen said:

Seat covers put on; I need to e-mail the company and see if they'll send me the cover for the flip up console because it wasn't included for some reason.
Over all the fit of them is great! Well worth the wait considering I ordered these back in March.

You must be registered for see images attach

Also fixed my exhaust so it won't rattle anymore. I've got a new muffler and new 3" exhaust tips ordered, now I need to find a shop that will bend me up a set of 3 inch tailpipes.

You must be registered for see images attach

Click to expand...

Nice seat covers, where did they come from?

Mangonesailor said:

Ah, I remember telling you about a 5v flip-flop circuit that would give us the light but I can't remember where I sourced it.

Click to expand...

Yeah I think that's where I got mine after I saw you recommend it to someone else. I can't remember where I got it either at this point, but I still have it in the package as I'm just now getting everything put together and starting on the wiring this weekend. If I remember, I'll take a picture of the package when I get home tonight and post it up on this thread.

Reluctanse said:

Nice seat covers, where did they come from?

Click to expand...

Headwaters Seat Cover company; they were the only company I could find that made anything for a 60/40 bench.
------------------
Well the plot thickens with this damn electrical issue.
Went to NAPA, got a new AD244 and went to swap it in right in the parking lot, still not charging. So me and the NAPA guy picked around and found this.

I don't know how it happened, but it burnt that fuse up, and I feel horrible because I don't know how it happened! So we swapped in a Grote 150 amp circuit breaker after fiddling around and everything was fine. Truck drove home perfect, as soon as I got it in the driveway and parked, I shut it off and went to start it, and nothing. Not even a click from the starter, just the faint ding of the door chime box.
I popped the hood and noticed the plastic cover for the negative terminal was melted on to the post, did I kill this Odyssey battery or something?? It still shows 12-volts with the multimeter, but the truck won't do anything.

I'm at a loss, and super frustrated.

I don't recall, have you done the Big 3 yet? This sounds ground related to me and these trucks are notorious for ground issues. I would chase ask the grounds.

Reluctanse said:

I don't recall, have you done the Big 3 yet? This sounds ground related to me and these trucks are notorious for ground issues. I would chase ask the grounds.

Click to expand...

I put on @5vortec7's Big 3 kit about 2 years ago along with a brand new Odyssey; I swapped in the AD244 a month or two ago now.
I feel horrible because it's such great quality and I don't know if it's something I've done to cause issues or if something else happened.

BNielsen said:

I put on @5vortec7's Big 3 kit about 2 years ago along with a brand new Odyssey; I swapped in the AD244 a month or two ago now.
I feel horrible because it's such great quality and I don't know if it's something I've done to cause issues or if something else happened.

Click to expand...

Do you have a different battery you could swap in and see how things go? I am not familiar with the Odyssey's, but maybe it went bad...?