Usanumber1
Newbie
I just Swapped a 12 Valve into my 99 suburban, everything is solid except the engine temp sender. I thinned the harness about 6 weeks ago, and made sure to no cut connectors that i’d Need. Well somewhere I screwed up because my temp sender wire was unplugged.
the diagrams and connector charts state pin C11 is a yellow wire to the connector, but also has a second wire. My temp sender is green, and only 1 wire. Truck was a K1500 6.5L.
thank you.
the diagrams and connector charts state pin C11 is a yellow wire to the connector, but also has a second wire. My temp sender is green, and only 1 wire. Truck was a K1500 6.5L.
thank you.
