Recent content by Trlrider

  1. Trlrider

    OBD1 4L60E Scanning?

    There are really no transmission codes available on the '93/'94 transmissions. The OBD1 system is just not that advanced and there are only a couple of transmission parameters you can mess with. I have not opened the file on my Burb for at least a year, so I do not even remember what those...
  2. Trlrider

    4l60e standalone 0411 control on a tbi 4.3

    Watch this video to locate the wire to tap for a tach/rpm signal on a tbi engine. easier then me trying to explain it.
  3. Trlrider

    4l60e standalone 0411 control on a tbi 4.3

    he stated ".... from a 2002 blazer with...
  4. Trlrider

    Teach me BASIC ecm....

    The PCM I have marked "ANLY" was from a diesel. Thus the reason it does not show up on gearhead.
  5. Trlrider

    Swapping a tbi with a vortec please help I have a 1993 k1500 with a tbi engine an I want to put a 98 vortec engine! What do I have to change

    If you are planning to use the complete engine and transmission you will need the complete wiring harness and computer from the '98. The ecm for the Vortec will not work with the stock transmission in the '93. Full pumps will also need to be changed as well as multiple other parts. We just...
  6. Trlrider

    Rare paint codes

    if I ever get my '93 Sub finished and ready for paint, it will become WA177B - Emerald Green Metallic. Had a '96 Dually that color and loved it.
  7. Trlrider

    4 wheel drive vs 2 wheel drive engine mounts

    I have Don dozens of engine swaps between one onor and another and never once thought about it. The basic dimensions are identical and one swaps with the other. Including putting a V-8 where a V-6 was factory. The base mount on the frame bolted right up. My K5 had thousand of miles on it with...
  8. Trlrider

    Prerunner bumper ideas

    Kinda funny, we were building Pre-Runner style trucks before the general public knew what a Pre-Runner was! I remember having the first dual spare tire carriers mounted to the roll bar uprights on my 1976 C10 and the fuel tank in the bed. The rediculous comments made about that set-up. Then it...
  9. Trlrider

    Computer help for carb swap

    Interesting! No advance mechanism, Goes against everything I know with old school and new technology, and still run smooth without burning pistons, having a load of knock or being a bear to crank. Worked on one not to long back that had a MSD box attached to a small cap factory dizzy only...
  10. Trlrider

    Computer help for carb swap

    A factory small-cap HEI? Or a Aftermarket? Okay, then how are you controlling timing advance, since the factory small cap HEI does not have any built in mechincal advance mechanisms? I have a few of those dizzies on the shelf, and none have a mechanical advance.
  11. Trlrider

    Who has the best reputation for reman 4L60E’s?

    I have had two 700R4's and a 4L60E built by Monster Transmissions and Performance out of Brooksville, Florida. My 700R4 has over 80K on it behind a mildly modified 350sbc) in a 4x4 K1500 Suburban (started out life in a K5 Blazer. It does not see allot of rough usage but occasionally it gets put...
  12. Trlrider

    1988 G20 A Team Drift Van - another air pump delete thread

    You need to put a Idler in place of the missing air pump. There is also a idler made specifically for non-A/C models.
  13. Trlrider

    GM crate engines?

    One if the reasons I am not running the EBL, don't want to deal with multiple units.
  14. Trlrider

    '93 K1500 engine swap

    Thanks for the link! I had seen it in research but forgot where I had seen it or who had created it it. Back on the list for fine tuning this rig. As mentioned before, it will be late June before I get back to working on this as the next two weeks are dedicated to getting the kid to the 4-H...
Top