Recent content by BkY32

  1. BkY32

    Trusted websites for new/used parts that are not priced to the moon.

    Yeah when it comes to something like that I do go to a supplier.
  2. BkY32

    Trusted websites for new/used parts that are not priced to the moon.

    Yeah I assumed so it was wishful thinking
  3. BkY32

    Trusted websites for new/used parts that are not priced to the moon.

    Thank appreciate you all. My biggest issue is some parts I need I’ve seen say they are discontinued so some websites want a lot for them. And junkyards around me want just as much for something that may or may not even work.
  4. BkY32

    Trusted websites for new/used parts that are not priced to the moon.

    Anyone know of a trusted website that sells all parts of a gmt-400? I have use your genaral parts places like autozone napa etc ebay, partsgeek unfortunately had bad experiences with partsgeek and used rockauto but it does not have everything for example the cover for under hood relay and the...
  5. BkY32

    Upper intake bolts/brackets and valve cover help.

    Thank you.. Coming in clutch with that. What did you get this from. Cause I have few different books and it had nothing of this.
  6. BkY32

    Upper intake bolts/brackets and valve cover help.

    That is right. I didn't have bags at the time or else I would have I did the next best thing and took photos of each one but new phone so lost them. They are the same except like I said 3 give or take are shorter.
  7. BkY32

    Upper intake bolts/brackets and valve cover help.

    Update that is a old shim for a starter I threw in with it all. Still not sure about that bracket. Or if it matter where each bolt goes back into the upper intake.
  8. BkY32

    Upper intake bolts/brackets and valve cover help.

    Ah I feel like an idiot I didn’t notice it came out.
  9. BkY32

    Upper intake bolts/brackets and valve cover help.

    So I did the mpfi upgrade got the intake back on just need to remember where some brackets go torque bolts and connect the connectors simple stuff. But as I was putting the studs back in I noticed 3 or 4 of them are shorter then the rest and I can not remember if it matters where they go I had...
  10. BkY32

    Finally got around to doing the MPFI Swap..

    Alright thanks I will try to get some or use motor oil. And yeah some people tried to get me to use the bolts to pull down I said I will pass. Also did you use a new bracket or re use the old one.
  11. BkY32

    Finally got around to doing the MPFI Swap..

    My old one had a greyish so does the new and I would reuse it but its wore out. Motor has over 300k miles. And the injection that was in it wasn't even the one I had in it someone swapped it on me when I was out of state. Also did you reuse the old bracket or get a new one?
  12. BkY32

    Finally got around to doing the MPFI Swap..

    1997 Silverado k1500 5.7 vortec I got the new injector put in but the limes seemed like they were kinked by the look but didn't feel like it but they were tight though. I just used the same bracket that the old injector was sitting on cause I assumed I could wasn't sure if I needed a new one...
  13. BkY32

    Budget Fuel Injection Replacement.

    Yeah I stopped to prevent that and took out plugs and turned it over by hand to clear out the fuel. I do know its more then one messed up I want to say 4-6 are considering the amount of fuel that came out compared to the others.. I also have been looking at that same replacement on rockauto but...
  14. BkY32

    Budget Fuel Injection Replacement.

    I’m not sure I’m just going to replace the whole thing to get a new regulator also and see if that’s what’s causing my issue of it dumping so much fuel that it locks my engine up.
  15. BkY32

    Budget Fuel Injection Replacement.

    I have a 1997 k1500 5.7 Vortec and I have to replace my fuel injection. And I was wondering if anyone can recommend some cheaper replacements and trusted places to order from. I don’t have a lot of money to spend. I’m hoping to get a replacement for $200ish. I found a website that had a mpi...
See more

Latest posts

Staff online

Members online

... and 16 more.
Total: 1,890 (members: 66, guests: 1,824)

Forum statistics

Threads
64,390
Messages
1,392,853
Members
51,554
Latest member
goosebandit

Share this page

Top