-
-
Lance 1992 replied to the thread Question about factory interior colors.They had four basic trim colors for 1988-1998, Beige/Neutral, Red, Blue, and Gray. I know Blue changed from Dark or Very Dark Blue to... -
-
Lance 1992 replied to the thread What is this called and where can I get one?.I tried looking on the AC/Delco site as well as others which is why I need to know the name or part number to try and find it. I've got...
-
Lance 1992 replied to the thread What is this called and where can I get one?.Ahh, I see, thanks for the clarification @movietvet.
-
Lance 1992 replied to the thread What is this called and where can I get one?.Just to be clear, the metal piece that attaches to the connector is what I need, not the connector or wires. Some of the responses...
-
Connector C407 where the pigtail from the fuel pump and sending unit plug into the connector at the frame near the gas tank has a metal...
-
-
Lance 1992 replied to the thread LEDs, Resistors, Flashers - Should I just give up?.That's good you figured it out. If you have any comments to add to post #3 in this thread, please do. It sounds like the very first...
-
Lance 1992 replied to the thread LEDs, Resistors, Flashers - Should I just give up?.I'll jump over to your thread and see if I have any insight.
-
Lance 1992 replied to the thread Stuck with Solid blinkers once I added New led corner markers ?.I had/have the same problem with my original 1992 C1500 sockets. I surprised it is not universal. I tried four different bulbs and...
-
Lance 1992 replied to the thread Fuel Gauge way past Full - How to test wiring at tank?.Thanks for that information Frank. One thing I need to clarify is that my gauge is way past Full AND it never moves.
-
Lance 1992 replied to the thread Fuel Gauge way past Full - How to test wiring at tank?.I have fixed the issue. It was the sending unit. A wire had become disconnected after it's connector broke off. I installed the new...
-
-
Lance 1992 replied to the thread Fuel Gauge way past Full - How to test wiring at tank?.I think it is the sending unit in the tank. I just got a new one (Delphi) and will install it this week (I hope). I did a continuity...
-
Wife doesn't want to fix a 30 year old truck because it's too old and she wants a newer truck? Hmmmm, applying her logic.... how old is...
-
Lance 1992 replied to the thread Fuel Gauge way past Full - How to test wiring at tank?.A simple continuity test would work. I would need to strip the insulation or get some connector that bites through the insulation at...
-
Lance 1992 posted the thread Fuel Gauge way past Full - How to test wiring at tank? in Audio + Electronics.1992 C1500 5.7 Ext. Cab The wires from my sending unit to the first connection (C407?) at the frame rail were crushed between the tank...
-
Be very careful about aggressive cleaning products. All that gunk has to go somewhere and has the potential to clog the oil pickup. I...
-
-
Loading…
-
Loading…
Members online
- 99xcss4
- 97Jack
- jus10inbrla
- No4x4andNo350
- majack82
- 95YardArt
- ZSC-114
- 1990Z71Swede
- VictoryRed
- goosebandit
- TonyM
- RichLo
- Alex92
- BLK97OBS
- JDGMC
- Icyagent
- 895oh
- HotWheelsBurban
- fancyTBI
- 95 Silverado
- vince72
- Stephen_B
- mACEo803
- Zack8
- Cokeman95
- johnckhall
- name
- 0xDEADBEEF
- Changito
- Komet
- hostile
- heavychevy9
- the_elegant_fox
- scott2093
- Aarondash
- BeXtreme
- Paullus
- caw_86
- Caman96
- Supercharged111
- captainamerica454
- 89chevy4scrap
- Hummer369873
- someotherguy
- enrique1717
- Catfish18
- supspt454
- Dantheman1540
- BonestockK1500
- yevgenievich