Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
I have had good luck using brake clean on a rag and wiping off the grease, then wiping it with Meguier's interior detailer.
Thx. I guess this would apply to head rests too.
Yeah I'd pass on the brake cleaner. It's a pretty aggressive solvent.
A worn-out toothbrush and some Windex will get almost any dirt out of the soft plastic interior parts. If you've got something that's really tough to get clean, you can use a little bit of Dow Scrubbing Bubbles. Do beware though it's stronger than the Windex and can remove color from parts, though generally only if they're already really weakened.
Richard
Yeah I'd pass on the brake cleaner. It's a pretty aggressive solvent.
A worn-out toothbrush and some Windex will get almost any dirt out of the soft plastic interior parts. If you've got something that's really tough to get clean, you can use a little bit of Dow Scrubbing Bubbles. Do beware though it's stronger than the Windex and can remove color from parts, though generally only if they're already really weakened.
Some things on the interior are just plain weak to begin with. Once it's got some years on it, you can remove the white printing from some of the controls with just a wet rag.
Richard