Replace Oil Cooler lines with AN lines?

[bullas1022]

This looks like everything i need, I think

You must be registered for see images attach

 

[SkyHighColorado]

and a flare tool. mine wasn't big enough. you will need 4 of each for the hose, you have 2 hoses.

 

[jlarson69]

and a flare tool. mine wasn't big enough. you will need 4 of each for the hose, you have 2 hoses.

Don't the AN to steel hose fittings flare themselves?

 

[bullas1022]

i have the hoes, hoes ends, tubing adapters, and the 3/8 npt adapters. and i already have a flare tool

 

[Cokeman95]

Did you use the items shown above?
SkyhighColorado are you saying 4 of the last item in the picture are needed?

 

[SkyHighColorado]

the first item I think you need 4 of. because they go on the ends of the feed and return lines correct? you can see all the parts I used in the photos I posted. you have to flare the end of the metal tubing from the junk lines which you can see I cut off in the pics.

 

[bullas1022]

I updated my earlier post with the right amount of fittings

 

[Cokeman95]

Awesome thanks. One more question for you. Why is the first fitting -6 and everything else is -8? Sorry if it's stupid question; I just want to make sure I don't get in the middle of this and have to stop.

 

[bullas1022]

dammit thats wrong to ill update it

 

[Cokeman95]

Appreciate your help on the parts list.