What type of rims are on your truck

[someotherguy]

Try this mess again...

Trucks I currently own...

1994 C2500LD converted to 5 lug, Centerline Smoothies 20x8.5 5.4" backspace, though you guys have seen this truck again since it's been dropped a tiny bit more and has fatter tires out back and a billet grille. I chose this pic because the wheels were shinier then they need a hardcore polishing now. 255/45/20's all around in this pic

You must be registered for see images attach

1994 C1500 with Boss 338's in gray 20x8.5 5.24" backspace, 245/50/20's. These are the first design 338's (small cap) so they need a 1/4" spacer up front to fit correctly on these trucks.

You must be registered for see images attach

G/F's 1993 C1500 I put together, with squarebody 15x8 Rally's, GMT400 trim rings, and Astro van caps, 275/60/15's (though now it's wearing the factory alloys off my '94 C1500 and some 235/75/15's)

You must be registered for see images attach

Richard

 

[someotherguy]

Past trucks...
My old 1992 C1500 ex cab longbed (shortly after I got it back in '99), with 15x8 Centerline Billet Stealths - old school!

You must be registered for see images attach

Then some Impala 17's...backspacing not great for a dropped truck so I had super small tires up front, and somehow not one single good pic

You must be registered for see images attach

Then a fresh set of Boyd Coddington Fury 17x8 and 255/50/17's

You must be registered for see images attach

Then Helo Skids 20's and can't remember the tire size. Something weird like 245/40/20

You must be registered for see images attach

1994 C1500 Suburban with Akuza Bounce 20's and 275/45/20, mild drop - just spindles and shackles

You must be registered for see images attach

Then later with Boss 308's and same tires and back at stock height

You must be registered for see images attach

Richard

 

[jmig]

Old skool Boss 304's for now, someday the billets will be on there!

You must be registered for see images attach

 

[sewlow]

Forgot this in my first post in this thread. I mount & balance my own wheels. (Friend's shop) I mount them like this. Only an observant few have noticed!

You must be registered for see images attach

 

[brockstar15]

Coy C5
Front: 18x7 4.25
Rear: 20x8.2 5.25

Mickey Thompson Street Comp
Front: P245/45R18
Rear: P275/40R20

You must be registered for see images attach

You must be registered for see images attach

I wanted to see if the 20x8.5 with a 275/40R20 tire would fit up front and it definitely won't lol i would've fit if i had rolled my fenders but i couldn't of turned but maybe 30 degrees before the tire would hit the fender.

You must be registered for see images attach

 

[great white]

Ive got HUGE 15's lmfao.Im running the usual 15x8 in the rear and 15x7 in front.275/60 and 245/60

You must be registered for see images attach

You must be registered for see images attach

Look like the old Cragar SS rims.

Can't beat the classics for my money.

Looks great.

 

[FastOrange]

Some other setup's i have had.

1994 C1500, 4/6 Drop:
20x9 Plantinum Warlords with 275/45R20 rears, 275/40R20 fronts.

You must be registered for see images attach

15x6.5 fronts (235/60), 15x7 rears (275/60), 73-87 Rally's, 73-87 Caps

You must be registered for see images attach

1996 C1500, Lowered 2", 4" Spindle, 4" spindle + 3" Body:
15x7 Pre-88 Steelies, 1970 Pontiac Hubcaps, Trimrings, 235/75 Studs.

You must be registered for see images attach

15x6 Fronts, 15x8 Rears, 235/75's all around, 73-87 Rally's, 88-98 Caps

You must be registered for see images attach

15x7 454SS/Sport wheels, 235/75's all around, 88-98 Caps (Stock for truck)

You must be registered for see images attach

15x8 73-87 Rally's, 32x11.5 MTR's, 73-87 Caps

You must be registered for see images attach

15x7 454SS/Sport Wheels, 35x12.50R15 Cooper ST's, Astro Van Caps

You must be registered for see images attach

1989 K1500, 1.5" crank
Stock 16x7 Wheels, 88-98 Caps, trimrings, 265/75R16 Cooper ST's

You must be registered for see images attach

 

[ChrisAU]

Currently 15x10 Black Steel Trucker D's. Want to swap them out for some classic style 15x8 bullet holes, like these:

You must be registered for see images attach

 

[redchevy914x4]

17X10 Weld Mountain Crushers and 35X12.50 Toyo MT. Since this picture I have had them repolished and have put 315/70R17 Kelly Safari TSR's on but I dont have a current pic.

You must be registered for see images attach

 

[whip16]

moto metal 909's 18x9 -12 offset

nitto mud grappler

You must be registered for see images attach

37x13.5x18

You must be registered for see images attach