98silverado98
Newbie
- Joined
- Jul 27, 2012
- Messages
- 4
- Reaction score
- 0
i agree! lol i got it all hooked up and it was really easy
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
The female 9005/9006 connectors (3rd picture, single wire coming out of each) simply get plugged into your passenger side OEM headlight connectors! The female connector on the HD Headlight harness with the black wire coming out of it, gets plugged into the original 9006 (low beam) connector on the passenger side. Then simply plug the other female connector on the HD Harness with the red wire (also marked with 2 white zip ties) into the original 9005 (high beam) connector on the passenger side!
If you have any other questions or would like further assistance, feel free to give me a call and I'll be happy to walk you through the whole installation!
Thanks again!
Just sent a PM. Really looking forward to getting an HD harness. Smoked my switch today, will be surprised if the pigtail isn't melted. Just bought the '93 K2500 Suburban. Never had this problem on my '88 truck with H4s. Anyway, this is my introduction to the forum. I've read any number of threads over the years, but never registered.
Just sent a PM. Really looking forward to getting an HD harness. Smoked my switch today, will be surprised if the pigtail isn't melted. Just bought the '93 K2500 Suburban. Never had this problem on my '88 truck with H4s. Anyway, this is my introduction to the forum. I've read any number of threads over the years, but never registered.
I think I found my first mood.
Will order this real soon!