How to: Install DIC in gmt400 overhead console

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

1997chevydriver

OBS MAGIC!!
Supporting Member
Joined
Sep 13, 2011
Messages
15,899
Reaction score
181
Location
Minnesota
the mpg an range are not correct on our trucks because it's calibrated for a blazer with a 4.3. My mpg reads low an with a full tank the range only reads about 280 miles.

This is a neat thing to have, but you need to know that before putting all the work in to install it....

The Range goes my fuel level and current average MPG. My MPG display is off by ~1 mpg.
 

bluex

Mall Crawlin' ****!!!
Supporting Member
Joined
Jul 15, 2011
Messages
27,206
Reaction score
1,793
Location
Spartanburg, SC
Ya but I think it uses the s series tank capacity to, which is 19 gals, not 26...

Edit
Ya it has to mine mpg reads 15 an with 19 gals that gives you a 285 mile range....
 
Last edited:

Fallsey

OBS Enthusiast
Joined
Aug 12, 2012
Messages
75
Reaction score
1
I have a 97 k1500, and i am interested in this DIC control. My truck has the console already and a mirror with compass/dim already. Do you have any DIC with the mpg features? How does the metric feature work? Could I splice into the mirrors compass?
 

1997chevydriver

OBS MAGIC!!
Supporting Member
Joined
Sep 13, 2011
Messages
15,899
Reaction score
181
Location
Minnesota
No need to splice into the compass the long console DIC's from the blazers have the compass inside the unit.

Metric feature works just like the standard setting.

If you are interested in getting one I think I have a couple out in the garage still I would have to check tomorrow night when I get home from work.
 

outalne94z71

Bouncing Truck Maker
Joined
Feb 29, 2012
Messages
2,055
Reaction score
46
Location
watertown, wi
No need to splice into the compass the long console DIC's from the blazers have the compass inside the unit.

Metric feature works just like the standard setting.

If you are interested in getting one I think I have a couple out in the garage still I would have to check tomorrow night when I get home from work.

paul if you don't have any left i still have the one i was not able to use
 

bluex

Mall Crawlin' ****!!!
Supporting Member
Joined
Jul 15, 2011
Messages
27,206
Reaction score
1,793
Location
Spartanburg, SC
I have a 97 k1500, and i am interested in this DIC control. My truck has the console already and a mirror with compass/dim already. Do you have any DIC with the mpg features? How does the metric feature work? Could I splice into the mirrors compass?

the range feature won't work on your 97. Everything else will though, it will just be off by about 1 mpg.....
 

Hezsus

Mr. Truck
Joined
Feb 8, 2011
Messages
877
Reaction score
6
Location
Dublin, Ont
mine is pretty well right on with the mpgs, mabye 1/4mpg out but thats likley my rough numbers, I would like to believe it reads 3-5mpg low though
 
Top