Oh awesome thanks. Well that actually brings up another issue I forgot about. Hazards don't flash, it only shows that both blinkers turn on but don't flash. Even with resistors in the new LEDs, I wonder if I just need to go back to stock halogen...
If you're going to stick with LEDs in the turn signals, you need to get an electronic flasher relay to replace the factory load-based flasher. I don't recall a part number for the LED flasher off of my head as I'm running stock bulbs, I'm sure someone else will chime in though.
Another thing to be aware of... If you're using the stock tail light housings with the circuit boards, you need a special type of LED called an SRCK for the middle socket even if you're using an LED flasher module. The way the sockets are wired a standard LED will not work.
Here's a link to some appropriate SRCK 3157s.
https://www.superbrightleds.com/mor...unction-27-smd-led-tower-wedge-retrofit/3557/