Moparmat2000
I'm Awesome
Looks good. What kind of welder are you using that it pops thru? I use a Lincoln weld pak 100 wire feed with a mig conversion. I have an 80 cu ft bottle of shielding gas. For sheetmetal I use .025" wire, heat setting A, and a feed speed between 2 and 3. On thin stuff like body sheetmetal it helps to strap it from the back side to support both pieces. Light tacks with spacing in between and cool down time. And keep tacking and letting it cool until it's a solid bead. It takes time this way but is solid, and you wont get rust bubbles popping up at the seams.