Matt Conner
The louder the better
This is the ECM i haveWhich ECM do you have? Pull the glovebox and slide the ECM to the left, it's held in place by spring clips on the left side and guide pins on the right. You'll need to disconnect the 2 wire looms (squeeze the blue clips) to remove it and, if it's still stock you should be able to see the Service number label. Then you can remove the cover (2 screws) and look to see what BCC you have. The picture on the right should be like yours.
http://www.gearhead-efi.com/BCCFind/
Here's one of mine with a ZIF (Zero Insertion Force) socket conversion so I can flash my own chips.
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach