A little update, got all the old ball joiints and bushings off, unfortunately, no pictures, because my phone died on me.
the bushings were very difficult to press in, I ended up buying a bottle jack press and a ball joint bushing kit and used the pieces from the kit on the press. worked out great.
the lower A-arm was not going back in, so i had to shave off some of the metal on the inner tube to get it to go in.
Installed 4.5" lift spindles on passenger side.
You must be registered for see images attach
new bilsteins going in on the front.
You must be registered for see images attach
up next steel brake Lines.
You must be registered for see images attach
You must be registered for see images attach