NorthTexasDylan
OBS Enthusiast
Stock frame mounts. I also just found the installation instructions and it does not appear as though the lift kit came with new UCAs so stock ones should work.
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
I just went out and looked and compared them to the pics online and they appear to be on the correct side.
Why do you get new control arms when you buy a lift kit? I would assume it is because there is a difference between the stock ones and the ones that are used on a lift kit. I ordered stock ones from 1aauto.com not thinking about the lift kit that was installed.
http://www.1aauto.com/control-arm-with-ball-joint-front-pair/i/1asfk01742?f=748247&y=1997
Stock frame mounts. I also just found the installation instructions and it does not appear as though the lift kit came with new UCAs so stock ones should work.
Stock frame mounts. I also just found the installation instructions and it does not appear as though the lift kit came with new UCAs so stock ones should work.
What are these blocks you are referring to?
Didn't you have to bolt blocks to raise you upper balljoint? How did you get the lift in the front?