-:Whippy's Mustang:-

[whiplash473]

6/12/2013

Pro-M filter and 360* read MAF

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

a little glass filler on the cracks that were a little deeper than "surface"

You must be registered for see images attach

Lining up my fancy ass Romac balancer

You must be registered for see images attach

 

[whiplash473]

TFS Track Heat lower on

You must be registered for see images attach

Nice chebby I saw on the way home from work.

You must be registered for see images attach

Just had to see what the long tubes looked like

You must be registered for see images attach

Quick mock-up with the upper and long tubes on

You must be registered for see images attach

Decided to glass bead my springs and respray them

You must be registered for see images attach

primed

You must be registered for see images attach

and sprayed, I used a yellow that's pertty much the same as they were from MaxSpeed.

You must be registered for see images attach

Hard to believe this is what my engine bay looked like before

You must be registered for see images attach

 

[whiplash473]

Got my "new" CCRM and PCM harness.

You must be registered for see images attach

Old harness vs. "new".

You must be registered for see images attach

Ass end of the trans buttoned up

You must be registered for see images attach

and the "new" tailstock on

You must be registered for see images attach

Cutting and buffing the engine bay

You must be registered for see images attach

Springs in, new hubs on, front suspension buttoned up.

You must be registered for see images attach

Sanding the trunk deck smooth.

You must be registered for see images attach

 

[95Escahoe]

Looking great, can't wait to see it all done

Sent from my HTC One X using Tapatalk

 

[whiplash473]

Wow, been too long since this I updated this.

Just a few randoms -

Welded a load balancer in the engine hoist so I could get the engine in nicely without scratching anything. I wanted to double check my welds so I thought "what better way?"

You must be registered for see images attach

Trans ready to be installed

You must be registered for see images attach

You must be registered for see images attach

Neighbor stopped by with this beauty, he's got two classics - a Model T and a Model A

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[whiplash473]

Got my "new" fuel rails, lines, and regulator

You must be registered for see images attach

You must be registered for see images attach

Trunk lid buffed and polished

You must be registered for see images attach

 

[whiplash473]

Getting ready to drop the engine in.

Flywheel on

You must be registered for see images attach

ARP love

You must be registered for see images attach

Getting the clutch on

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

I wasn't gonna indicate it but I'm glad I did, ended up being a few thou out.

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[whiplash473]

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[whiplash473]

More toys

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

The third gauge came in a day later but no pic, AEM analog oil psi.

The trans crossmember on my car is for a different tailstock so I had to get my old man to make a plate to compensate since there was really no reason to change the crossmember.

You must be registered for see images attach

painted

You must be registered for see images attach

and installed

You must be registered for see images attach

 

[whiplash473]

Decided a few things needed to look better with a nice looking engine.

scuffed

You must be registered for see images attach

basecoat

You must be registered for see images attach

cleared

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach