Vortec aftermarket valve covers

[kennythewelder]

This is what I have on my 97 5.7L Vortec. Polished aluminum, is what I wanted because of all the other polish work I have done under the hood.the heads are OE. They are a little taller than the OE covers. I had to cut the AC bracket brace, to make enough room to clear the new valve cover. I did spend some time tweaking on them before I installed them. Also had to hole saw a place for the PCV valve, and install a baffle inside but there was a boss for this already. I fooled with them for about a week before I installed them. I wanted them just rite before the install.

 

[PlayingWithTBI]

Here's what I have on my TBI but, Proform says they fit 87 - 2002 and are 1/4" taller than stock. I have full roller rockers underneath them too. The "T" nuts and oil cap are extra.

You must be registered for see images attach

You must be registered for see images attach

Price has gone up about $20 since I bought them. Had to get a little creative to get the PCV and breather hooked up.
www.summitracing.com/parts/pro-141-130

 

[L31MaxExpress]

Polished aluminum short valve covers on my 383. Had to grind on the a/c bracket a little.

You must be registered for see images attach

 

[Manimal]

I spy a marine intake

 

[99bluetahoe]

They look nice.