troubleshooting ideas?

[Uncle-Monte]

I just replaced timing cover, and subsequent oil pan gasket. I won't entertain you with the trials and tribulations of that wrestling match. But is it back together, and now won't start. It turns over good but that is about it. I have gone back over and checked connections and can not find anything visually wrong.
I can not hear well enough to tell if fuel pump is charging or not. It acts like no fuel.
So are there any directions you can point me in?

 

[slowburb]

Pull a plug and verify presence or absence of fuel after cranking. Do the same thing for spark. It's one or the other.

 

[skylark]

Is it a 96+? If so start checking the wiring to and the crank sensor.

 

[Uncle-Monte]

I had to get a new timing cover case on this 97 1/2 ton The crank sensor seem to set in further than the other cover. Is there a crank sensor adjustment?

 

[Uncle-Monte]

Been looking into that crank sensor. It looks like I have to buy a diagnostic tool and reset the codes?

 

[Uncle-Monte]

Good call on Crank sensor. After closer inspection, I found that I bent a pin on that sensor.
That was the ticket! Many Thanks!