TPS question

[BillK]

New to this forum
I have a 92 k1500 with 9 inches of lift

My question is. I replaced the TPS sensor and pigtail on my truck, there is a lever in the back of it and also a lever coming out of the throttle body. Now, does the lever on the sensor go behind or in front of the one coming out of the throttle body? The way I have it now is in front of the throttle body lever and it idles at 1500 rpms which is way too high. So, which one pushes which?
Thanks

 

[TylerZ281500]

lever? what?

 

[BillK]

You must be registered for see images attach

 

[sntrym]

That's not a stock TPS that I've seen on a GMT400. The ones I've ever seen on a TBI look like this one: http://www.oreillyauto.com/site/c/d...=Search_02207_1050916_2370&pt=02207&ppt=C0024

 

[sntrym]

But to answer your question, the lever on the TBI will push the sensor. The sensor has no motor, it's just a sensor

 

[BillK]

OK. That's how it's on there. But now it idles at 1500 RPM

 

[TylerZ281500]

thats a tpi sensor

 

[TylerZ281500]

tps sensor for a tpi i should say. regardless it has no place on your truck unless someone tpi swapped it. if thats the case then youd need to reprogram it.