my name is alex
suckin' gas
After reading around a bit on here, I decided to try the simplest method and it's working well for me so far, though it has only been a few months.
I loosened the strikers (all 4 on the Burb), pushed them as far in towards the interior as I could, and then retightened them. This made a huge difference. The Burb used to rattle horribly over bigger bumps/pot holes.
Just make sure not to over-loosen the strikers as I read you can lose the bolt on the rear of the striker in the body.
I loosened the strikers (all 4 on the Burb), pushed them as far in towards the interior as I could, and then retightened them. This made a huge difference. The Burb used to rattle horribly over bigger bumps/pot holes.
Just make sure not to over-loosen the strikers as I read you can lose the bolt on the rear of the striker in the body.