Rear brake line questions

[Eskimomann209]

Does anyone have part numbers to change the drop to a universal braided line as well as the lines going off to each drum?
I seen a guy with yellow braided lines running along the axle and I wondered why I can't seem to find part numbers for this conversion on here
I have a 14b SF rear
Thanks in advance guys

 

[SkyHighColorado]

If you cant find any pre made ones why not just make your own? probably would be a lot cheaper, better and you could do all of the lines.

 

[Eskimomann209]

I'm curious what part# would work as the T to split the one line to the two drums and what fitting size the drums are
Also what size hose is used?

 

[Eskimomann209]

So far I'll do this

To drums
http://www.summitracing.com/parts/ear-581531erl


Over diff
http://www.summitracing.com/parts/fra-582403

Couple of these correct length n color
http://www.summitracing.com/parts/EAR-63010132ERL/


Now I just need the correct fitting from the hard line up top
Might be this???
http://www.summitracing.com/parts/AAF-ALL50100/

If that's wrong I'll delete it
If anyone knows the size and threads on that please let me know

 

[SkyHighColorado]

I dunno but I think your going to need a double flare tool as well

 

[Eskimomann209]

You must be registered for see images attach

 

[Eskimomann209]

You must be registered for see images attach

 

[Eskimomann209]

Drop line from ORD for the 11 inch lift

Four 3/8-24 I.F to -3an

Two -3an hoses
One 30 one 36

You can/should go shorter on the 30

 

[poncho62]

I would be worried about those lines snagging on something...should be tucked into the housings better....and on top, not hanging down

 

[Eskimomann209]

Agreed the one on the driver side I had moved over the shock mount after the picture was taken