ccox
Newbie
I have a 95 ECSB 4x4. I swapped in a rear axle from a suburban, which has slightly larger drums. All new drums, shoes, hardware and cylinder. My rear passenger shoes are not releasing properly and getting extremely hot when driving. I also don't have a lot of pressure in the lines. Seems like every time I bleed them, they get worse. When braking, if I give it a quick pump, it seems to brake normal. ABS light randomly goes on and off and will also randomly kick in for some reason. The codes thrown were front ABS sensors. I replaced the vacuum booster and went to change out the master cylinder but that made things much worse.
I took it to a shop and they said my parking brake cables were rusted and that's causing it but I never use my parking brake. Where should I start troubleshooting? I'm to the point where I'm going to get rid of this thing if I can't figure it out.
Please help!
I took it to a shop and they said my parking brake cables were rusted and that's causing it but I never use my parking brake. Where should I start troubleshooting? I'm to the point where I'm going to get rid of this thing if I can't figure it out.
Please help!