Really bad bump steer.

[Dread]

My truck is bagged on 22s I have 2" spindles and stock arms, I'm not runnin a sway bar. Is that's what's causing the really bad bump steer? Help me please

 

[Pierced]

No, its not the sway bar. From what I have read the bump steer comes from the steering linkage being at the improper angles due to being so low. As far as I have read there is not a lot we can do about it. You could add a steering stabilizer and it should help a little or if you have the money custom spindles with lowered steering linkages will help as well.

 

[sewlow]

Not cheap.

http://www.summitracing.com/parts/BAE-3301011/

*Edit* Just checked. Those are for Camaro/Firebird. They used to make them for GMT400's. Can't find a listing to find out if they still do. Try contacting Baer.

 

[sewlow]

Here ya go!

http://www.summitracing.com/parts/BAE-3301010/Application/?query=Year%7c1998

 

[Dread]

Not cheap.

http://www.summitracing.com/parts/BAE-3301011/

*Edit* Just checked. Those are for Camaro/Firebird. They used to make them for GMT400's. Can't find a listing to find out if they still do. Try contacting Baer.

So these will work for our trucks?

 

[sewlow]

Post #4 is the right info. I'd check with Summit to confirm.

 

[DRAGGIN95]

I set of no notch tie rod's will help keep the steering angles better and help reduce the bump steer. Like these http://www.silverstarcustoms.com/store/product_info.php?cPath=33&products_id=80

 

[sewlow]

Never knew about those. Thanks, there, Draggin'.

 

[DRAGGIN95]

Anytime!

 

[Dread]

Thanks y'all im gonna check em out