Archaic2021
I'm Awesome
- Joined
- Dec 8, 2014
- Messages
- 330
- Reaction score
- 385
im gonan clean the egr valve.
Would a bad egr cause a missfire?
Would a bad egr cause a missfire?
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Never installed new distributorDid you adjust cam crank correlation after resetting the distributor?
What are the misfire counts for each cylinder?
Some scan tools LIE about P0300. The "real" code may be P0301--P0308, but the tool just says "P0300".
How can you know that unless you've got the misfire counts for each cylinder?True random missfire.
It could.im gonan clean the egr valve.
Would a bad egr cause a missfire?
Did you adjust cam crank correlation after resetting the distributor?
He didn't ask if you installed a new distributor. He asked if you adjusted it properly so the cam sensor signal is synchronized to the crank sensor signal. Spec is within 2 degrees at ~1100 rpm.Never installed new distributor
Last time i had a p0302 cylinder 2 code. I figure it wpuld throw that code fir each cylinder.How can you know that unless you've got the misfire counts for each cylinder?
It could.
He didn't ask if you installed a new distributor. He asked if you adjusted it properly so the cam sensor signal is synchronized to the crank sensor signal. Spec is within 2 degrees at ~1100 rpm.