Project Granpas Hand Me Down 1990 Step-side

[Guido]

Good job man !! Your team is better than the Gas Monkey Garage !!!

 

[96LS6.0]

Good job man !! Your team is better than the Gas Monkey Garage !!!

IDK about that but thanks for the compliment. Still have lots to do, but the truck is stuck in my shop with a tree down in front of the shop door due to Hurricane Laura. I will soon get back to it and post updates

 

[96LS6.0]

So I installed a Ford E150 Van rear bumper

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[96LS6.0]

Yes I rock different wheels on each side

You must be registered for see images attach

You must be registered for see images attach

 

[96LS6.0]

Its ugly, but its mine and Iv build it. Still a long ways to go. Body drop, interior and paint coming soon.

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[Aarong23]

Its ugly, but its mine and Iv build it. Still a long ways to go. Body drop, interior and paint coming soon.

You must be registered for see images attach

You must be registered for see images attach

Where do you get that cone shaped center cap for those steelies?

You must be registered for see images attach

 

[96LS6.0]

I got them off ebay. I took a measurement of the center bore on the rim. It was 3", the wheel had some notches in the center bore I had to grind with a flapper wheel to make them fit.

 

[96LS6.0]

Below is the link to the bullet center caps I used

https://www.ebay.com/itm/4-CAP-DEAL...e=STRK:MEBIDX:IT&_trksid=p2057872.m2749.l2649

 

[Aarong23]

Below is the link to the bullet center caps I used

https://www.ebay.com/itm/4-CAP-DEAL-WELD-CRAGAR-BULLET-DOME-5-LUG-WHEEL-RIM-CHROME-CENTER-CAPS-3-18-BORE/321836807701?ssPageName=STRK:MEBIDX:IT&_trksid=p2057872.m2749.l2649

Thank! I have a spare set of steelies sitting around that I was going to put on for the winter, but wanted to spruce them up a bit. Not a bad price either. Can't decide if I want to part with my ss style wheels.

 

[96LS6.0]

Been a lil while. Few updates

Got my wheels powder coated

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach